|
Standard Features
Body - 63 to 100L Motor frames are available in cast iron as well as aluminum constructions. 112M to 225M Motors Frames are in cast iron constructions only.
End Covers - All end covers and flanges are with integrated bearing housings and of Cast Iron construction.
Terminal Box - Terminal boxes from 63 to 90L aluminum frames are of aluminum construction with MS pressed terminal box covers.
All other frames are with Cast Iron construction with MS pressed terminal box covers.
Cable Entry - Except 80 frame aluminum constructions, all terminal boxes can be rotated in step of 90 Degree and are provided with Metric threads for cable gland. Other threads like PG, B.S. Condute can be provided.
Shaft - Shafts are of EN 8 D steel with a taping in the center to secure pulley or similar types of mountings. Shaft with special diameter and length, with specified shaft material can be manufactured.
Bearings - Single Row Deep Groove Ball Bearings of Internationals brands like SKF, TATA are used on drawing as well as non driving ends.
Lubrication - “ELCEN” motors are fitted with High Temperature grease of Lithium Complex soap type, NLGI 2 no, in the bearings, for optimum performance and longer bearing life. ( Castrol LCG-2 )
Sealing - “ELCEN” motors are fitted with “V” rings for protection at the shaft and with rubber gaskets at terminal box and terminal cover. Oil seals can be provided instead of “V” rings on the shaft on request.
Mountings - Standard motors are available with either B3-Foot mounting , B5-Flange mounting, B14-Face mounting, B34-Foot +Face mounting and B35-foot+Flange mounting. Special mountings can be manufactured suitable to customer’s requirements.
Noise Level - “ELCEN” motors are design and manufactured to perform silently. The noise levels are within the limits as per EN 60034-9
Balancing And Vibration - All rotating parts, mainly rotor with shaft are dynamically balanced to grade 2.5 for smooth running. However precession grade 1.0 can also be
|
